In This Article
For all types of engineering tasks, officials always keep their data safe on software. And, recently, you may have heard a lot about Revit. how to change units in Revit? Because for new users, this may sound a bit difficult to use.
So, today I will tell you the simplest and easiest ways to enter or change units in Revit software. If you keep reading the article till the end, you will understand completely what Revit software is, who uses this software and how you can change units in this software!
What is Revit?
Revit, full name AutoDesk Revit is software that mostly architects, structural engineers, landscape architects, mechanical, plumbing, and electrical engineers, designers, and contractors use. This is a building modeling and labeling software that you need to know while learning Revit units and you can keep your data safe. And, the best thing is that you will see CAD and BMI working on this software too. So, the reviews about this project software are also positive.
Before I tell you how to change units in Revit, I want to clear one misconception. People normally think that Revit is really difficult to master. Well, it is, but there is another way to master it skillfully.
You may also like: Best 17 Inch Laptops Under 1000 Dollars
Is it hard to learn the use of Revit?
Technically, it is not hard to learn the use of Revit, normally people get a negative answer when they ask how to use Revit. If you learn in phases, you can easily master it in 3 months or so. However, if you want to learn the whole software usage, it will take more than a year. So, you can start from the layout, then usage, enter digits, and finally edit digits.
How to change units in Revit if they are many?
Now, you don’t have to worry how many units you have to edit in Revit, because you can control angle, area, cost per area, mass density, length, Distance, rotation angle, slope, speed, time, volume, and currency.
You may also like: 8 Best Laptops For Revit in 2022 (Expert Recommended)
How to change units in Revit?
If you have mistaken a unit and don’t know how to change units in Revit, you reach out to the project units by going to manage tabs. Choose your unit, enter that unit and set some additional setting on the box. You are good to go now!
Below is the stepwise guide with the Images to help you understand Revit change units in practical.
1- For learning how to change units in Revit, you can go to the manage tab on Revit software and select Project unit option from the settings group. See the image below to understand where you will find it.
2- Now you can select the unit type that you want to change.
3- Choose the new unit that you want to enter instead of the new one.
4- Now, you will see another box with some additional settings. You can change these settings according to your use.
So, the above-discussed methods told you how to change units in Revit?
Related Article: What is worth of my laptop at pawn shop?
How to measure in Revit?
So, we just learnt Revit change units and the next but most important thing is How to measure in Revit or Revit dimension settings. First you have to measure the distance between 2 elements. This depends on what you are measuring.
Now, the measure tool gives you a quick way for measuring and also for temporarily displaying, including the length (and also the horizontal angle if you require). These are all about the individual walls or about the model lines you will be needing to select in plan views.
Also, in elevation views, you will use this exact tool for selecting only the ends of your model walls. These will be running perpendicular to the view direction (for displaying the wall height).
In both your plan and elevation views of the project, you can create a line or even some chains of line. These lines will be connecting the points that you will specify.
Also, in this process after learning how to change units in Revit in at of these cases, the dimensions that the tool has generated will stay on the screen. And, it will remain on the screen until you will start your next measurement or until you exit the tool.
Also, the tool will display the length dimensions on the Options Bar in the total length box.
Note: If you want to draw detail or lengthy lines, you can use the Measure Between Two References tool. This will be in the form of arrow and you can use it to measure the length or the reference points. However, please note that you will not use the Measure Along An Element line to measure a detail line. That’s because the line will not be a model element.
So, you learnt how to change units in Revit and you can now start your work with this software in no time! You can go for detailed tutorials to master it!
Can I measure in 3D Revit?
Yes, you can use a Revit 3D plugin to measure units or angles in 3D Revit with 3D models.
How to align annotations in Revit?
You can download the add-in from the Revit, so install it. Now, go to the ribbon, add-in, and the align panel. Do your setting there.